China wholesaler 15-250 Kw 10bar Energy Efficiency Direct Screw Air Compressor screw shaft diameter

Product Description

0.5-80 M3/Min 6-40 Bar 5.5-400 Kw Electrical Stationary Industrial AC Power Direct Driven/Coupled Rotary Screw Air Compressors Advantages

1.CZPT Enhanced energy saving screw air compressor reached the super energy saving level
 
2.Energy Efficient Index 1(EEI 1) approved according to GB19153-2009, the energy consumption is 10%~15% lower than EEI 2.
 
3.CZPT air compressor design with 72 types of technology patent, real bigger air flow 
 
4.State-of-the-art screw element, original Germany CZPT air end, ladvanced SAP profile design, superior Sweden CZPT element bearings
 
5.CZPT air compressdor dopts world-renowned components, such as Schneider electronics from France, DENAIR filters from Germany, Danfoss pressure sensor from Denmark, etc. contribute to guarantee the compressor longer service life.
 
6.Smart touch screen design and 0 pressure drop design
 
7.Higher efficiency cooling system and electrical motor
 
8.Stainless steel pipes, reasonable inner design, ensure long service life without maintenance.

Technical Parameters Of Energy Saving Rotary Screw Air Compressor 

Model Maxinmum working Capacity(FAD)* Installed motor power Driving mode& Noise Dimensions(mm) Weight Air outlet
pressure 50 HZ 60 HZ Cooling method level** pipe diameter
bar(g) psig m3/min cfm m3/min cfm kw hp   dB(A) L W H kg  
DA-5 7.5  109 0.80  28 0.80  28 5.5 7.5 Belt Driven 75 900 600 860 315 G3/4″
8.5  123 0.78  28 0.78  28 5.5 7.5 Air Cooling 75 900 600 860
DA-7 7.5  109 1.09  39 1.09  39 7.5 10   75 900 600 860 315 G3/4″
8.5  123 1.07  38 1.07  38 7.5 10   75 900 600 860
10.5  152 0.92  32 0.91  32 7.5 10   75 900 600 860
13.0  189 0.73  26 0.72  26 7.5 10   75 900 600 860
DA-11 7.5  109 1.66  59 1.66  59 11 15   75 1230 650 900 324 G3/4″
8.5  123 1.64  58 1.64  58 11 15   75 1230 650 900
10.5  152 1.45  51 1.45  51 11 15   75 1230 650 900
13.0  189 1.13  40 1.12  40 11 15   75 1230 650 900
DA-15 7.5  109 2.54  90 2.53  89 15 20 Direct Driven 75 1465 990 1345 453 G1-1/4″
8.5  123 2.51  88 2.50  88 15 20 Air Cooling 75 1465 990 1345
10.5  152 1.97  70 1.86  66 15 20   75 1465 990 1345
13.0  189 1.91  67 1.83  65 15 20   75 1465 990 1345
DA-18 7.5  109 3.04  107 3.65  129 18.5 25   75 1465 990 1345 453 G1-1/4″
8.5  123 3.03  107 3.63  128 18.5 25   75 1465 990 1345
10.5  152 3.00  106 2.38  84 18.5 25   75 1465 990 1345
13.0  189 1.91  67 2.36  83 18.5 25   75 1465 990 1345
DA-22 7.5  109 3.57  126 3.65  129 22 30   75 1465 990 1345 477 G1-1/4″
8.5  123 3.55  125 3.63  128 22 30   75 1465 990 1345
10.5  152 3.00  106 2.38  84 22 30   75 1465 990 1345
13.0  189 2.97  105 2.36  83 22 30   75 1465 990 1345
DA-30 7.5  109 5.28  187 4.49  159 30 40   85 1600 1250 1550 682 G1-1/2″
8.5  123 5.26  186 4.48  158 30 40   85 1600 1250 1550
10.5  152 5.21  184 4.47  158 30 40   85 1600 1250 1550
13.0  189 3.45  122 3.58  126 30 40   85 1600 1250 1550
DA-37 7.5  109 6.54  231 6.33  224 37 50   85 1600 1250 1550 728 G1-1/2″
8.5  123 6.52  230 6.30  222 37 50   85 1600 1250 1550
10.5  152 5.21  184 4.47  158 37 50   85 1600 1250 1550
13.0  189 5.16  182 4.43  156 37 50   85 1600 1250 1550
DA-45 7.5  109 7.67  271 7.79  275 45 60   85 1600 1250 1550 728 G1-1/2″
8.5  123 7.62  269 7.76  574 45 60   85 1600 1250 1550
10.5  152 6.46  228 6.24  220 45 60   85 1600 1250 1550
13.0  189 6.41  226 4.44  157 45 60   85 1600 1250 1550
DA-55 7.5  109 9.76  345 9.14  323 55 75   85 1876 1326 1700 1310 G2″
8.5  123 9.67  342 9.06  320 55 75   85 1876 1326 1700
10.5  152 7.53  266 7.74  273 55 75   85 1876 1326 1700
13.0  189 7.40  261 6.30  222 55 75   85 1876 1326 1700
DA-75 7.5  109 14.21  502 11.72  414 75 100   85 1876 1326 1700 1325 G2″
8.5  123 12.55  443 11.63  411 75 100   85 1876 1326 1700
10.5  152 9.51  336 11.43  404 75 100   85 1876 1326 1700
13.0  189 9.23  326 8.75  309 75 100   85 1876 1326 1700
DA-90(W) 7.5  109 16.62  587 17.01  601 90 120 Direct Driven 72 2450 1800 1700 2450 DN80
8.5  123 16.37  578 16.82  594 90 120 Air Cooling Or 72 2450 1800 1700
10.5  152 14.21  502 14.87  525 90 120 Water Cooling 72 2450 1800 1700
13.0  189 11.77  416 11.27  398 90 120   72 2450 1800 1700
DA-110(W) 7.5  109 20.13  711 19.10  674 110 150   72 2450 1800 1700 2500 DN80
8.5  123 20.05  708 19.06  673 110 150   72 2450 1800 1700
10.5  152 16.33  576 17.01  601 110 150   72 2450 1800 1700
13.0  189 14.11  498 14.68  518 110 150   72 2450 1800 1700
DA-132(W) 7.5  109 22.85  807 24.37  861 132 175   72 2450 1800 1700 2600 DN80
8.5  123 22.73  802 24.23  856 132 175   72 2450 1800 1700
10.5  152 19.88  702 18.95  669 132 175   72 2450 1800 1700
13.0  189 16.51  583 16.82  594 132 175   72 2450 1800 1700
DA-160(W) 7.5  109 26.92  950 27.90  985 160 215   78 2650 1700 1850 3200 DN80
8.5  123 26.86  949 27.76  980 160 215   78 2650 1700 1850
10.5  152 22.44  792 23.97  846 160 215   78 2650 1700 1850
13.0  189 19.63  693 18.82  664 160 215   78 2650 1700 1850
DA-185(W) 7.5  109 28.89  1571 30.53  1078 185 250   78 2650 1700 1850 3300 DN80
8.5  123 28.84  1018 30.44  1075 185 250   78 2650 1700 1850
10.5  152 25.11  886 27.46  970 185 250   78 2650 1700 1850
13.0  189 22.08  780 23.69  836 185 250   78 2650 1700 1850
DA-200(W) 7.5  109 31.88  1126 30.53  1078 200 270   80 3000 1950 2030 4750 DN100
8.5  123 31.82  1124 30.44  1075 200 270   80 3000 1950 2030
10.5  152 28.48  1006 30.22  1067 200 270   80 3000 1950 2030
13.0  189 25.00  883 27.07  956 200 270   80 3000 1950 2030
DA-220(W) 7.5  109 36.20  1278 37.22  1314 220 300   80 3000 1950 2030 4800 DN100
8.5  123 36.15  1276 37.17  1312 220 300   80 3000 1950 2030
10.5  152 31.71  1120 33.25  1174 220 300   80 3000 1950 2030
13.0  189 28.48  1006 27.07  956 220 300   80 3000 1950 2030
DA-250(W) 7.5  109 43.31  1529 42.87  1514 250 350   80 3000 1950 2030 4850 DN100
8.5  123 43.24  1527 41.30  1458 250 350   80 3000 1950 2030
10.5  152 36.03  1272 37.04  1308 250 350   80 3000 1950 2030
13.0  189 31.55  1114 33.15  1170 250 350   80 3000 1950 2030
DA-280(W) 7.5  109 46.59  1645 47.16  1665 280 375   85 3700 2300 2450 5200 DN125
8.5  123 46.53  1643 45.64  1612 280 375   85 3700 2300 2450
10.5  152 42.95  1516 42.56  1503 280 375   85 3700 2300 2450
13.0  189 35.89  1267 36.95  1305 280 375   85 3700 2300 2450
DA-315(W) 7.5  109 53.16  1877 50.88  1797 315 425   85 3700 2300 2450 6000 DN125
8.5  123 52.63  1858 50.83  1795 315 425   85 3700 2300 2450
10.5  152 43.05  1520 46.27  1634 315 425   85 3700 2300 2450
13.0  189 42.93  1516 40.32  1424 315 425   85 3700 2300 2450
DA-355(W) 7.5  109 63.37  2238 58.12  2052 355 475   85 4500 2500 2450 7000 DN125
8.5  123 63.16  2230 56.54  1997 355 475   85 4500 2500 2450
10.5  152 52.63  1858 51.57  1821 355 475   85 4500 2500 2450
13.0  189 43.79  1546 45.35  1601 355 475   85 4500 2500 2450
DA-400(W) 7.5  109 70.99  2507 61.72  2179 400 550   85 4500 2500 2450 8000 DN125
8.5  123 70.64  2494 59.72  2109 400 550   85 4500 2500 2450
10.5  152 52.63  1858 56.52  1996 400 550   85 4500 2500 2450
13.0  189 46.34  1636 51.35  1813 400 550   85 4500 2500 2450

*) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
**) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
***) EEI 1- Energy Effiency Index 1, which refers to enhanced energy saving series
Specifications are subject to change without notice.

DENAIR Factory & Product Lines

DENAIR Exhibition

We carefully selected for you the classic case

Enhanced Energy Saving Air Compressor in Oman

Project Name: Sandblasting in Muscat, Oman.

Product Name: 75KW 100HP Enhanced Energy Saving screw air compressor EEI 1 (Energy Efficiency Index 1) with air dryer, air receiver tank and air filters.

Model No. & Qty: DA-75+ x 1.

Working Time: From June, 2016 till now

Event: In June, 2015, 1 set of CZPT enhanced energy saving air compressor system was installed in Muscat Oman. This is the first project finished by CZPT distributor in Oman. Our partner Mr. Hari shared the photos at working site to us as a good starting. That means more and more CZPT energy saving solutions will contribute to the industries in Oman in the near future. CZPT air compressor factory and air compressor distributor will try the best to provide top quality products, cost effective solution and excellent service for local users in Oman. In order to ensure the most professional service, the distributor plans to send 2 service engineers to CZPT factory in ZheJiang for training and learnin. We will update the news at that time.

FAQ

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2:No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your air compressor machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

screwshaft

Screw Shaft Types

If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

Machined screw shafts

Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find one to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.

Ball screw nuts

If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the two ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These two features ensure that the ball and the nut meet at two points. You’ll be amazed by the results of the work of these ball screw nuts.
screwshaft

Threaded shank

Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress two pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as one with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is eight mm in diameter but has a thread pitch of one mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

Round head

A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to one mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
screwshaft

Self-locking mechanism

A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.

China wholesaler 15-250 Kw 10bar Energy Efficiency Direct Screw Air Compressor   screw shaft diameterChina wholesaler 15-250 Kw 10bar Energy Efficiency Direct Screw Air Compressor   screw shaft diameter
editor by CX 2023-11-21

Recent Posts