China Professional Fk12/FF12 Ball Screw End Support Bearings with high quality

Product Description

Product Description

Ball screw brackets
Description:
Ball screw brackets is supporting the connection screw and motor bearing brackets, brackets general points: fixed side (K add after such as BK12) and support unit is installed (F if BF12) are useful for the adjustment of the preloading JIS5 level of angular contact ball bearings.
Ball screw brackets, containing for subminiature ball screw developed by contact Angle 45 ° subminiature angular contact ball bearings, can obtain high rigidity, high precision of steady turning performance.Support the lateral support unit use deep groove ball bearings.Support unit such as EK, BK type internal bearing load of the right amount of lithium soap grease, with a special seal gasket to seal, can be installed directly, can use for a long time.

Specifications and feature

1) It is matched with the ball screw shaft , the whole together works well .(ball screw assemble including –Ball screw shaft, Ball screw nut, Nut housing, End supports and coupling)
2)Rolled and ground
3)Super high presicion
4)Low noise
5)Low backlash
6)In large stock
7)Prompt delivery
8) the material is S45C carbon steel
9) No MOQ demand

We can supply a range size of the end support unit bearings suitable for ball screw and lead screw. Available in both flanged and pillow block versions that cater for shaft diameter from 4mm up to 40mm.

ball screw end support unit:

BK type: thrust pillow block fixed
 
BK10, BK12, BK15, BK17, BK20, BK25, BK30, BK35, BK40, BK50
BF type: radial simple support
 
BF10, BF12, BF15, BF17, BF20, BF25, BF30, BF35, BF40, BF50
EK type: fixed side
 
EK06, EK08, EK10, EK12, EK15, EK20, EK25
EF type: floated side
 
EF06, EF08, EF10, EF12, EF15, EF20, EF25
FK type: flange mount thrust bearing
 
FK06, FK08, FK10, FK12, FK15, FK17, FK20, FK25, FK30, FK40
FF type: flange mount simple support
 
FF06, FF08, FF10, FF12, FF15, FF17, FF20, FF25, FF30, FF40

 

Ball screw nut housing series:

Ball screw size Nut housing size and material
SFU1204/SFS1205/SFS1210 DSG12H / iron steel / aluminium alloy
SFU1605/1605/SFS1605/SFS1610/SFS1616/SFS1620 DSG16H / iron steel / aluminium alloy
SFU2004/2005/2571/SFS2005/SFS2571/SFS2571 DSG20H /iron steel / aluminium alloy
SFU2504/2505/2571/SFS2505/SFS2510/SFS2525 DSG25H /iron steel / aluminium alloy
SFU3205/3210/SFS3205/SFS3210/SFS3220/SFS3232 DSG32H /iron steel / aluminium alloy
SFU4005/4571/SFS4005/SFS4571/SFS4571/SFS4040 DSG40H / iron steel / aluminium alloy

Product Parameters

Ball screw nut housing size:

Detailed Photos

There are many parts what can be matched into the ball screw, Please
choose what you need:

Related products

There are many kinds of products we can offer, If you are interested in them,
please click the picture and see the details.

Our Advantages

Our Advantages: High precision good machines, Professional QC department and test rooms,

Our service

Our principle:

Quality first, credibility is the key, the price followed

Packaging & Shipping

Packaging & Delivery
PP bag for each linear shaft, Standard exported carton outside for small order shipping by international express,such as DHL, TNT, UPS,Wooden box outside for big quantity or very
long linear shaft by sea, by air

Packaging Details: 1. Individial plastic bag, paper box ,secure carton 2. As clients’ requirement.
Delivery Detail: Within 3–7 Days Against the Down Payment

Company Profile

12,Production flow

ERSK Company Image

Our service and after-sale service

1. We have a group of professional engineers we can provide drawings according to customer’s requirements.

2. We have more than 20 machines for offering professional ball screws end machining service.

3. We can rebuild, refurbish, and make emergency repairs to ball screws and linear guideways.

4. We can disassemble, clean, polish ball screws and linear guideways.

5. Two years free maintenance to ball screws and 1 years free maintenance to linear guideways.

High Quality With Reasonable Price

Why Choose Us? —-ERSK—–

1)ERSK professional manufacturer

We have the professional production team, high precision production equipments ,focused on precision transmission parts for 10years and have our own brand name CZPT .

2) Quality control

1. We have QC department to control quality for each step.

2. We also have Automatic product equipments(German Chiron FZ15W ,DMG XIHU (WEST LAKE) DIS. MAX3000 Machining Centers ) which can cantrol the precision itself

3. ISO9001:2008

3)Competitive Price

ERSK is a manufactory which can export directly to customer, so there is no intermediary cost involved. We provide our foreign customer lower price than the domestic market. Since we can get tax refund from the government.

4)Quickly Delivery

We are big manufacturer ,have large amount of stock, we can delivery customer’s order just-in-time for small order, 7-15 days for big order.

5) Best After-Sale Service

ERSK supply the after-sale service and technical assistance as per customer’s requirement and needs. Customers are always given quick support.

Get more detailed information !!!
Inquiry with us, Now!!!

We will reply within 24 Hours!!!

Thank you for visiting!!!

 

 

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which 1 is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.
screwshaft

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, 1 should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are 2 major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically 1 millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect 2 elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China Professional Fk12/FF12 Ball Screw End Support Bearings   with high qualityChina Professional Fk12/FF12 Ball Screw End Support Bearings   with high quality

Recent Posts